Talampaya Industrial Coverall

The Talampaya covers industrial tasks where contact with liquids, splashes or process dust may occur. The polyurethane-coated polyester fabric presents a smooth, continuous surface that rinses easily, and the heat-sealed seams remove needle holes as a path of entry. The integrated hood and the elasticated cuffs and ankles close the assembly without accessories, and the front closure sits behind a sealed storm flap. The final configuration — hood, cuff type, compatibility with the rest of the equipment — is defined together with the client according to the agent present and the exposure time of the task.

• Smooth, continuous surface that rinses easily at the end of the task.
• Heat-sealed seams that remove needle holes as a path of entry.
• Elasticated hood, cuffs and ankles that close the assembly without accessories.
• Configuration defined with the client according to the agent and exposure time.

Construction

One-piece coverall with integrated hood and front closure behind a sealed storm flap.

Fabric

Polyurethane-coated polyester with an easy-rinse smooth surface.

Seams

Heat-sealed seams on shoulders, sleeves and legs.

Fit

Elastic at hood, cuffs, ankles and waist.

Compatibility

Loose cut to be worn over regular workwear.

Configuration

Hood and cuff variants defined according to the agent and the exposure time of the task.

Colour

Slate grey.

• Body: polyurethane-coated polyester.
• Heat-sealed seams with continuous tape.
• Encapsulated elastics at hood, cuffs, ankles and waist.
• Front zipper with sealed storm flap.

• Process plants
• Material handling and transfer
• Industrial cleaning and wet maintenance
• Tasks with splashes or process dust

• Rinse with clean water after each use.
• Clean with a damp cloth and neutral soap; do not dry clean.
• Air dry flat, away from direct heat sources.
• Do not iron or bleach.
• Store hanging or flat, without sharp creases.
• Discard the garment if there are punctures, cuts or opened seams.