Calafate Cargo Trousers

The Calafate is the oil and gas line trouser, cut in FRARTEX-2400AS. It is built around a simple idea: trousers always tear in the same places. That is why it adds double-layer knees with internal access for knee pads, made for kneeling on grating and concrete, and uses the same inherent flame-resistant cloth throughout. The six pockets include two bellows cargo pockets that take hand tools without deforming the leg, and the low retroreflective tapes keep the worker's movement visible at the height a machine operator actually sees.

• Full body in inherent flame-resistant and antistatic FRARTEX.
• Double-layer knees with internal access for knee pads.
• Six pockets, two of them bellows cargo, for hand tools.
• Low retroreflective tapes, at the height where a machine operator detects movement.

Construction

Straight-cut cargo trousers with six pockets.

Fabric

FRARTEX-2400AS, 88% cotton / 10% nylon / 2% anti-static, 240 gsm.

Reinforcements

Double-layer knees with internal knee-pad access and crotch reinforcement.

Visibility

50 mm retroreflective tape on each leg, below the knee.

Pockets

Two side-access front pockets, two flap back pockets and two bellows cargo pockets.

Fit

Waistband with wide belt loops and side elastic.

Colour

Graphite, navy or khaki.

• Body: FRARTEX-2400AS, 88% cotton / 10% nylon / 2% anti-static, 240 gsm.
• Knees and crotch reinforced with the same fabric in double layer.
• 50 mm retroreflective tapes stitched on both legs.
• Metal zipper and heavy-duty stamped button.

• Drilling and workover
• Facility maintenance
• Plant operation
• Kneeling tasks on grating and concrete

• Machine wash cold on a normal cycle, inside out.
• Do not use chlorine bleach or softeners that leave residues.
• Air dry or tumble dry on low, avoiding prolonged sun exposure.
• Iron at medium temperature, never over the retroreflective tapes.
• Replace the garment if cuts, burns or wear compromise its integrity.